✳️Safety device Riken Optech RSL230-Stage2
Direct Projection Type Safety Light Curtain RSL230-Stage2
RSL230-Stage2 is designed to increase productivity while ensuring personnel safety with fail-safe circuitry, if any component within the system fails, a stop command is sent to the press, disabling it until the failure is corrected.
- Positive protection with 20mm pitch optical axes.
- Built-in self-check circuit.
- Ultra-slim design requires minimum installation space and allows large workplace.
- Wide variations of the sensors with 8 to 64 optical axes are available.
- Error-mode Monitor shows the conditions of the system with LED.
- Unaffected by ambient light with modulated light system.
- Significantly improved safety with various added functions.
- Installation is fast and simple.
✔️ Light Sensor
|RSL230-140 – 1260|
|No. of Optical Axis||8 – 64 axes|
|Protection Height||140mm – 1,260mm|
|Optical Beam Spacing||20 mm|
|Minimum Object Sensitivity(MOS)||30 φ|
|Detective Distance||0.2m – 6m or 0.2m – 2.5m (short scan type)|
|Response Time (incl.Control Box)||15 ms – 35 ms or less (ON→OFF)|
|Power Supply||24 VDC|
|Current Consumption (max)||220mA – 260mA|
|Optical Element||Infrared LED (wavelength 870nm)|
|External Diagnosis Function||Available|
|Temperature Range||Working:-10-55℃(non freezing) / Storage:-30-70℃|
✔️ Control Box
|Power Consumption||+24V / 15W||+24V / 30W|
|Power Supply (Control Box)||100 VAC – 240VAC 50/60Hz|
|Output Contact||1Ax2, 1Bx1|
|Output Contact Rating||250VAC, 6A(Cosφ = 1)|
|Temperature Range||Working:-10-55℃(non freezing) / Storage:-25-85℃|