Description
CHINFONG OCP-A SERIES
C-Type Presses OCP-A Series
C-Frame Single Crank Power Presses
OCP series is open back, single crank, “C” frame, designed for general stamping application such as drawing, forming, blanking, piercing, bending, marking, sizing, trimming etc. either in single or continuous stroke mode.
Features:
- High driving torque wet clutch and brake.
- Super rigid steel frame.
- Minimize frame deflection guaranteed.
- Fast response hydraulic overload protection.
- Extra long, precision, six-point gibbings.
- Convenient die cushion installation.
- Power receptical (Single phase, 110V)
Specification
Product |
OCP-80A |
OCP-110A |
OCP-160A |
OCP-200A |
OCP-260A |
Rated Tonnage Point-mm |
4 / 2 |
6 / 3 |
6 / 4 |
6 / 4 |
6.5 / 4 |
Strokes Per Minute(Fixed speed)-S.P.M. |
60 / 35-80 / 75-140 |
45 / 30-60 / 65-125 |
40 / 20-50 / 40-70 |
35 / 20-45 / 50-70 |
30 / 20-40 / 40-50 |
Stroke Length-mm |
150 / 60 |
180 / 70 |
200 / 90 |
200 / 100 |
250 / 150 |
Slide Adjustment-mm |
80 |
80 |
100 |
110 |
120 |
Die Height(S.D.A.U.)-mm |
330 / 375 |
350 / 405 |
450 / 500 |
450 / 500 |
500 / 550 |
Main Motor-HPxP |
7.5×4 |
10×6 |
15×4 |
20×4 |
25×4 |
Slide Adjusting Motor-HPxP |
0.5×4 |
0.5×4 |
1×4 |
1×4 |
2×4 |
Reviews
There are no reviews yet.