Description
✳️ AIDA Direct Servo Formers DSF-N2 Series
The 3rd generation of metal forming has arrived.
- AIDA’s unique high-torque, low RPM servomotor is connected directly to the driveshaft. Realizing high precision and high value-added forming.
- Optimum slide motions even for difficult-to-form material or for product shaping conditions can be easily set and then stored in the job recipe data bank.
✳️ Capacity Range
Press capacities range from 1100 kN to 3000 kN. Also available with a wide bed W Series to accommodate a fully synchronized servo transfer unit.
Model |
Capacity |
Stroke Length |
Continuous SPM (No Load)※1 |
Die Height |
Slide Area |
Bolster Area |
Side opening※2 |
(kN) |
Upper Row Denotes Fwd/Rev. Motion(mm) |
Upper Row Denotes Fwd/Rev. Motion(mm) |
(mm) |
LR×FB(mm) |
LR×FB(mm) |
(mm) |
|
DSF-N2-1100 |
1100 |
70/110/150 |
102/84/70 |
400 |
1360×520 |
1660×680 |
700×345(335) |
180 |
~70 |
||||||
DSF-N2-1600 |
1600 |
80/120/160 |
94/78/66 |
450 |
1500×580 |
1800×760 |
780×385(375) |
200 |
~60 |
||||||
DSF-N2-2000 |
2000 |
110/160/200 |
79/66/57 |
500 |
1850×650 |
2150×840 |
860×425(415) |
250 |
~50 |
||||||
DSF-N2-2500 |
2500 |
120/170/230 |
68/57/46 |
550 |
2100×700 |
2400×920 |
940×465(455) |
280 |
~40 |
||||||
DSF-N2-3000 |
3000 |
120/180/240 |
64/52/43 |
650 |
2400×900 |
2400×1200 |
1220×590(580) |
300 |
~35 |
※1The above Continuous SPM (No Load) value is for crank motion.
※2Dimensions in parentheses ( ) show the height above the bolster.